 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.hamlin.com (R) File E47258 MDSM-10 REED SWITCH Features Surface mounting normally open switch Sub-miniature size with 10.16mm x 1.80 mm (0.400" x 0.071") glass envelope Capable of switching 200Vdc or 0.5A * at up to 10W 1012 Ohms insulation resistance * Available sensitivity 10-25 AT * Bulk or tape and reel packaging. See sheet 2 * * * * Benefits Hermetically sealed switch contacts are not affected by and have no effect on their external environment Low, stable contact resistance * Very small space requirements * Zero operating power required for * contact closure Fit and forget durability * * * * * * Applications Position sensing Level sensing Security Metering Mobile phones SWITCH DIMENSIONS (in) mm (.400)MAX 10,16 (.071)MAX O1,80 RECOMMENDED LAND PATTERN (.039.004)TYP 1,000.10 (.441) 11,20 (.114)TYP 2,90 (.000)MIN 0,00 (.490.010) 12,450.25 (.615.010) 15,620.25 (.051)TYP (.078)MAX 2,00 1,30 SWITCH TYPE ELECTRICAL RATINGS Contact Rating (1) Voltage Power Switching Breakdown Current Switching Carry Resistance Contact, Initial Insulation Capacitance Temperature Contact Operating Storage (2) OPERATING CHARACTERISTICS Time Operate (3) Release (3) Shock Vibration Resonant Frequency MAGNETIC CHARACTERISTICS Pull-In Ranges Available Rating Sensitivity (4) Test Coil Switch AT before modification 11ms 1/2 sine 50-2000 Hz. MDSM-10 Contact Form A - Normally Open Watts - max Vdc - max. Vdc - min. A - max. A - max. Ohms - max. Ohms - min. pF - typ. C C 10 200 250 0.5 1.0 0.12 1012 0.2 -40 to +125 -65 to +125 ms - max. ms - max. G - max. G - max. kHz -typ. 0.5 0.1 100 30 6.5 Ampere Turns (AT) Ampere Turns (AT) 10-25, 10-15, 15-20 and 20-25 15 L4989 Notes:- 1) Contact Rating. Product of the switching voltage and current must never exceed the wattage rating. Contact Hamlin for additional load/life information. 2) Storage Temperature. Long term exposure at elevated temperature may degrade solderability of the leads. 3) Operate (including bounce) /Release Time. Tested per EIA/NARM RS421A with diode suppressed coil. 4) Rating Sensitivity. The value at which the contact ratings and operating characteristics are determined. De-rating may be required below this value. Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: +1 920 648 3000 Fax: +1 920 648 3001 Email: sales.us@hamlin.com DETAILS ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY & SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE may be affected by the application that part is used for. Tel: +44 (0) 1379 649700 Fax: +44 (0) 1379 649702 Email: sales.uk@hamlin.com Product performanceassist purchasers by providing information specific totheparticular application. Upon request Hamlin will a liability whatsoever for any purchaser's reliance upon the information Tel: +49 (0) 6181 953660 Fax: +49 (0) 6181 9536666 Email: sales.de@hamlin.com Hamlin disclaims allsheet without further consultation with Hamlin's authorised representatives. Sheet 1 of 2 Sheets contained in this data Issue:1 19/11/04 DCR:B2737 Tel: +33 (0) 1 4687 Fax: +33 (0) 1 4686 6798 Email: sales.fr@hamlin.com www.hamlin.com (R) File E47258 MDSM-10 REED SWITCH Packaging: - Bulk - 100 per Box or Tape and Reel - 3,000 per Reel TAPE DIMENSIONS (in) mm (.079) 2,00 (.157) 4,00 (.315) 8,00 (.059+.004 ) -0 O1,50+0,10 -0 (.069) 1,75 3.0 (.230) 5,84 (.559) 14,20 (1.118) 28,40 (.079) O2,00 (1.260) 32,00 (.406) 10,31 (.629) 15,97 (.067 +.006 ) -.002 O1.70 +0,15 -0,05 (.059 -0 ) O1.50+0.10 -0 +.004 (.230) 5,84 3.0 (.014) 0,36 (.075) 1,90 (.047) 1,20 (.083) 2,10 (.075) 1,90 1. ALL TAPE & SPROCKET HOLE DIMENSIONS ARE PER FIA-481 UNLESS NOTED 2. ALL POCKET DIMENSIONS ARE (.004") 0,10mm 3. ALL DIMENSIONS ARE TO INSIDE OF POCKET REEL DIMENSIONS (in) mm (3.937.020) 100,00,5 (12.992-.030 ) 330,00 +0,25 -0,76 +.010 (.075.016) 1,90.4 TYP. (1.512) 38,4 MAX. ) 16 . 0 . 4 27 0 (.8 21,0 O YP . 12 0 (1.276+.008 ) -0 (32,4+0.2 ) -0 MEASURED AT HUB T (.512.008) O13,00.2 Hamlin USA Tel: +1 920 648 3000 Fax: +1 920 648 3001 Email: sales.us@hamlin.com DETAILS ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY & SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE may be affected by the application that part is used for. Hamlin UK Tel: +44 (0) 1379 649700 Fax: +44 (0) 1379 649702 Email: sales.uk@hamlin.com Product performanceassist purchasers by providing information specific totheparticular application. Upon request Hamlin will a liability whatsoever for any purchaser's reliance upon the information Hamlin Germany Tel: +49 (0) 6142 923920 Fax: +49 (0) 6142 923921 Email: sales.de@hamlin.com Hamlin disclaims allsheet without further consultation with Hamlin's authorised representatives. Sheet 2 of 2 Sheets contained in this data Issue:1 19/11/04 DCR:B2737 Hamectrol France Tel: +33 (0) 1 6047 3000 Fax: +33 (0) 1 6015 9136 Email: sales.fr@hamlin.com |
Price & Availability of MDSM-10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |